|
The signal is strongest at night. Place the clock near a window facing Colorado for the best results.
A tower icon with waves indicates the clock is receiving the signal.
The clock defaults to Eastern Standard Time. You must manually select your time zone so the atomic signal displays the correct hour for your location. sharp atomic clock spc373 user manual
Use the (or + / - ) buttons to toggle through the time zones: P (Pacific) M (Mountain) C (Central) E (Eastern) Press the TIME/SET button again to confirm. 3. Manual Time and Date Entry
This is almost always a setting issue. Refer to Section 2 to ensure you have selected the correct zone (P, M, C, or E). The atomic icon is missing or flashing. The signal is strongest at night
To get started, you will need . Open the battery compartment on the back of the clock.
Keep the clock at least 3-6 feet away from computers, TVs, or microwaves, as electronic interference can block the signal. 6. Troubleshooting Common Issues The time is off by exactly one or more hours. The clock defaults to Eastern Standard Time
The clock attempts to sync every night at midnight. If it fails, it will try again an hour later. If it hasn't synced in days, try moving it to a different wall or closer to a window. The display is fading.