The dual extruder assembly must be manually secured with two screws (typically 2.5mm). Orient the nozzles so the fans face forward.
The X-Pro uses assisted manual leveling via its 4.3-inch touchscreen to ensure a flat printing surface. qidi x-pro manual
Plug the power cord into the lower-left corner at the back and use the primary power switch to start the machine. Calibration and Bed Leveling The dual extruder assembly must be manually secured
Take out the protective foam and cut the plastic ties securing the extruders. Ensure you remove the belt fixing clips from both sides of the Y-axis. qidi x-pro manual