Micronta Multimeter 22 212 User Manual Portable ⭐ Ultimate

Set the selector dial to the highest available voltage range (e.g., 1000V) to avoid damaging the needle.

If the DC current or resistance ranges fail to respond, check the internal glass fuse. micronta multimeter 22 212 user manual

If you cannot zero the "0 OHMS" scale, the internal AA battery is likely weak and needs replacement. Set the selector dial to the highest available

Remove the battery if the meter will be unused for more than a week to prevent corrosion from leaks. Remove the battery if the meter will be

Set the range to OHMS, touch the probe tips together, and turn the OHM ADJ knob until the needle points to "0" on the top green scale. 2. Measuring Voltage (AC/DC)

With probes disconnected, use a small screwdriver to turn the plastic screw at the base of the needle until it points exactly to "0" on the left side of the scale.

3-color mirrored analog scale to prevent parallax error. Operating Instructions 1. Preparation and Battery Installation