Intronics thermostats typically feature , which minimizes temperature fluctuations compared to standard on/off controllers. PI02 Model : 24 VAC floating digital thermostat. PI04 Model : 24 VAC/VDC modulating digital thermostat. Series II LED/LCD
For accurate readings, mount the unit approximately above the floor. Avoid placing it: In direct sunlight or near heat-producing appliances. Near drafts, doors, or windows. On exterior walls. Wiring and Mounting
Backlit display, 3 fan speeds, compressor time delay, and non-volatile memory (EEPROM) that saves settings during power loss. 2. Installation Guide intronics digital room thermostat user guide
Use 18-22 gauge wire. Follow the terminal designations on the back of the unit. Ensure connections are firm.
models, are designed for high-precision HVAC control in residential and commercial settings. This guide provides the necessary steps for installation, operation, and advanced configuration to ensure your system runs efficiently. Series II LED/LCD For accurate readings, mount the
Use a flat-head screwdriver to unlock the snaps at the bottom of the thermostat and pull the backplate away.
: Versatile units for fan coil systems, available in 24V, 120V, and 220V versions. On exterior walls
Screw the backplate to the wall using the provided anchors and snap the thermostat body into place. 3. Operating Instructions
Turn off the main breaker to the HVAC equipment before starting.
Only trained technicians should perform the installation to avoid damaging the heating or cooling system. Mounting Location