Cwfl-6000 Manual (INSTANT – 2025)

Allows the user to set a fixed temperature (ideal for environments with extreme temperature swings). How to Change Temperature Settings: Press and hold the "SET" button. Use the up/down arrows to navigate parameters. Adjust the value and press "SET" again to save. ⚠️ Common Alarm Codes

The chiller automatically adjusts the water temperature based on ambient room temperature. This is the default factory setting.

The S&A Teyu CWFL-6000 is engineered to handle the intense heat of industrial fiber lasers. It features two independent cooling channels: Cools the laser optics and cutting head. Low-Temp Channel: Cools the fiber laser source. Technical Snapshot: cwfl-6000 manual

Verify that your local voltage matches the chiller’s requirements (typically 3-phase 380V). 📟 Control Panel & Operation

The CWFL-6000 is a high-performance dual-circuit water chiller designed specifically for 6kW fiber laser systems. Proper installation and maintenance are critical for protecting your laser source and optics. Allows the user to set a fixed temperature

Connect the "Water In" and "Water Out" ports to your laser equipment. Ensure all clamps are tight to prevent leaks.

Check the water level and inspect hoses for signs of wear. Adjust the value and press "SET" again to save

To keep your 6kW laser running at peak efficiency, follow this maintenance checklist:

Change the cooling water entirely to prevent algae and mineral buildup.

Clean the dust gauze (the side filters) using an air gun.