Turn the adjustment bolt with an Allen wrench while monitoring the front pressure gauge until the target PSI is reached.
+--------------------------+-----------------------+------------------------------------------+ | Maintenance Task | Frequency | Purpose | +--------------------------+-----------------------+------------------------------------------+ | Check Filter Gauges | Daily | Monitor for pressure differential drops | | Purge Air via Petcocks | After filter change | Prevent pump cavitation & dry-running | | Clean Sump and Tank | Bi-Annually | Eliminate sludge and debris buildup | | Check Line Hose Wear | Monthly | Prevent dangerous line ruptures | +--------------------------+-----------------------+------------------------------------------+ Troubleshooting Faults
The return pump will automatically cycle to equalize the sump and tank coolant levels. Adjusting System Pressure chipblaster jv10 manual
Moves spent coolant from the CNC machine's sump into the integral ChipBLASTER storage tank.
Allows users to manually change or dead-head the pump to dial in exact pressure output without exceeding maximum limitations. Installation & System Set-Up Turn the adjustment bolt with an Allen wrench
Once a continuous stream of coolant escapes the petcock valves, close them tightly.
Small valves located on top of the filter housings used to release trapped air from the system. Allows users to manually change or dead-head the
Draws filtered coolant from the reservoir and delivers it directly to the machine spindle or turret at high pressure.
Press the button on the control panel to cycle coolant and force trapped air out.
Understanding how the internal parts interact ensures safe operation and simplifies maintenance: