Console Driver — Checkpoint Usb-c

Older Check Point appliances relied on the DB9 or RJ45 "rollover" cables. Modern laptops, however, rarely feature these ports. By integrating a USB-C console port, Check Point allows administrators to use a standard USB-C to USB-A (or USB-C to USB-C) cable without needing a bulky serial adapter.

Ensure you are plugged into the port labeled , not the standard USB management ports. The driver is blocked (macOS) Go to System Settings > Privacy & Security . checkpoint usb-c console driver

Plug your USB-C cable into the appliance's "Console" port and your laptop. Verify in Device Manager: Right-click the Start button > Device Manager . Expand Ports (COM & LPT) . Look for "Silicon Labs CP210x USB to UART Bridge." Note the COM port number (e.g., COM3 ). Terminal Emulator Settings Older Check Point appliances relied on the DB9

Once the driver is active, you must configure your terminal software (like PuTTY, Tera Term, or SecureCRT) to match the appliance's serial requirements. Serial Line COMx (Match your Device Manager) Speed (Baud) 9600 (Default) or 115200 Data Bits Stop Bits Parity Flow Control Ensure you are plugged into the port labeled