Look for the (e.g., AU6989SN, AU6998) and the Flash ID Code .
The status bar will turn yellow (processing) and then green (pass). If it turns red, the memory chip itself might be physically dead. Troubleshooting Common Failures
The NAND flash chip is wearing out. You can try setting the "Scan Level" to a deeper cycle in the AlcorMP settings to "wall off" the dead sectors. alcor micro unknown fa00 - f w 3613
This is the primary reason people seek F/W 3613 tools. The MPTool is the only way to reset the "read-only" flag triggered by the controller's safety firmware.
Reliable databases for these tools include sites like or USBDev . Step 3: The Repair Process (Flashing) Warning: This process will destroy all data on the drive. Run as Administrator: Open the AlcorMP.exe file. Look for the (e
Most FA00 errors can be fixed by the "Optimized Capacity" or "Default" settings. Start: Click the "Start" (S) button.
💡 If the software still says "Unknown," try plugging the drive into a USB 2.0 port on the back of your computer (motherboard port). USB 3.0/3.1 ports often interfere with the low-level flashing commands required by Alcor controllers. To help you find the exact software you need, tell me: What is the Controller Part-Number from ChipGenius? What is the Flash ID (the long string of letters/numbers)? Are you trying to recover data or just fix the drive ? Troubleshooting Common Failures The NAND flash chip is
This is the firmware version currently flashed onto the controller. If this is appearing as "Unknown," it means the firmware is corrupted or the software version you are using is too old to recognize it. Step 1: Identify Your Exact Chipset